POWERTAC Pathfinder - 11500 Lumen LED Lampe in Tricolor

Extremely robust. Extremely bright. Extremely durable.

Multi-color floodlight with mega 11500 lumens! The colors can be switched to white, blue, green and red. The floodlight comes with a waterproof case, holster and batteries.

Battery

4 cells 18650 (3400 mAh)
Rechargeable lithium-ion battery pack with protective circuit board

Characteristics

• Length: 307mm


• Bezel diameter: 90mm


• Housing diameter: 50mm end cap


• Diameter: 50mm 3.7lbs (without battery)


• (Dismantling the battery will void the warranty)


• LED TYPE: CREE-XHP70 and CREE XM-L2 U2 white LED

Instructions for use

1. The Ashlight comes assembled and includes a charger and holster.
2. Using White Light - Click the "W" button to turn on the white light mode. Pressing the opposite key (“C” key) will
Adjust the light intensity (Low - Medium - High - SOS-Stobe). Click the "W" button again
o white light.
3. Color light consumption - Click the "C" button turns on the color light mode. Pressing the opposite key (“W” key)
will cycle through the color mode settings (Red, Green, UV, Red/Blue Strobe, Red/UV/Green Strobe). Click on the "C"
Button again turns on the color mode.
3. To view the remaining battery charge level (when the battery is not in charging mode) - press and release
The charging switch, power indicator lights up as follows and turns off automatically after a few moments.
All three indicator lights are on: 70% to 100% remaining
Two indicator lights: 30% to 70% remaining
An indicator light comes on: Less than 30%; ashlight needs to be charged.
4. Charge the ashlight-plug AC charger into the power adapter and then plug the AC charging cable into the charging port. The charge level indicator lights up to indicate the charging status:
A slight ashing: less than 30% charged
One light on and second light ashing: 30% to 70% charged
Two lights on and third light ash: more than 70% charged
All three lights on: 100% fully charged and charging is complete.
5. To charge other external devices using the battery, press and hold the charging switch in the end cap. The indicator light(s) for the power level(s) light up and stay on. (If none of the indicators for power are displayed, refer to Instruction 4 to charge the ashtray first). The USB output is ready to charge other devices. Remove the USB port rubber cover to expose the port and insert your own smartphone USB cable into the USB port. The battery should charge the devices. The power indicator remains on.

Powertac Lifetime Guarantee (Download PDF)

https://www.youtube.com/watch?v=gXpbqGFIgaA

 

Download catalogue (19.5 MB)